How do I change the battery in my Colgate electric toothbrush?

To replace the battery of your toothbrush, follow these steps:

1. Hold the toothbrush, with the head oriented to the ground.
2. Find the battery compartment on the base of the toothbrush.
3. Unscrew the toothbrush base, turning it reverse-clockwise.
4. Pull out the base.
5. Remove the old battery, lifting it from the positive side.

How do you disassemble an electric toothbrush?

Step 1: Disassemble the Toothbrush

1. Remove the brush head.
2. Using a small adjustable spanner place this around the flat of the white plastic part of the toothbrush as shown and twist the spanner anticlockwise.
3. After twisting about 30degrees the white plastic should disengage from the main body of the toothbrush.

How do you change the head on a Colgate 360?

To Replace Brush Head: Gently pull the brush head from the handle and press a new Colgate® 360® brush head firmly into place. Replaceable Head and Batteries included. Further Replacement Heads cannot be purchased. After use, rinse toothbrush head thoroughly, shake off excess water, and store upright.

How do you change a toothbrush battery?

No, you cannot replace the battery in your Oral-B electric toothbrush. The battery is contained within the electronics of the toothbrush handle and the unit is then sealed to keep it water tight.

Can you change battery in Colgate 360 toothbrush?

Safety Information. Do not install batteries backwards, charge, put in fire, or mix other battery types. Replace all batteries at the same time.

What is the lifespan of an electric toothbrush?

The average life span of an electric toothbrush is around 5 years. Manufacturers normally offer a 2 year warranty should the brush fail sooner. But some brushes will last a lot longer — we know of people still using electric toothbrushes that are 10 years old.

How do I reset my electric toothbrush?

To turn the toothbrush off, hold the on/off button until the brush stops. When you turn it back on again, it will be back in Daily Clean mode. You can reset the handle by holding on/off button for 10 seconds. All the lights should do a double-blink simultaneously to let you know that this has been successful.

Are all Colgate electric toothbrush heads the same?

Just 4 different brush heads – one size fits all: At the time of writing the Colgate ProClinical line of electric toothbrushes have a one size fits all approach to their brush heads. This means that the brush heads fit to any of the ProClinical toothbrush handles.

How do you change a Colgate toothbrush head?

Changing the brush head

1. Unlock the toothbrush head by turning it counter clockwise until the two indicators are aligned;
2. Pull the toothbrush head up in order to remove it from the handle.
3. Replace it with a new toothbrush head, ensuring that the indicators are aligned.

How do you remove battery from electric toothbrush?

The basic method is:

1. Dismantle handle.
2. Desolder old battery and other connections from PCB.
3. Remove charging coil, pressure warning light, pressure switch, PCB and battery.
4. Replace battery.
5. Reassemble PCB and other parts.
6. Solder in connections for parts and new battery.
7. Reassemble handle.

Why isnt my electric toothbrush working?

How Can I Identify an Electric Toothbrush Problem? If the appliance doesn’t work at all, make sure the power is on at the outlet, then test the electrical cord and battery recharger with a multimeter and replace the cord or charger if needed. If the unit still doesn’t work, clean the charger post.

How long do Oral B electric toothbrushes battery last?

Depending on which model you have, it should take between 14 and 22 hours to fully charge the brush, and then the juice should last for between 5 and 12 days of brushes (when brushing twice a day, for 2 minutes each time).